OUTRAGE FUSION 50 FLYBAR PRO KIT

Fusion 50 Power System Choices :

The Fusion 50 has been designed to accept a wide variety of power systems. Your final choice may be dictated by your performance requirements, equipment you already have, and your modeling budget.

As a general rule, with increasing cell count (voltage) current draws will be lower for the same final power output. While the helicopter flies well on all the below combinations, the higher cell count setups (10 or 12s) will have the highest power at the lowest current draws.

For all combinations a motor of at least 2500 watts is required. The Scorpion 4025 series is a good choice. The motor kv can be different from that shown, and head speed corrected with a different choice of pinion (the main gear is 129T). This table is for example only.

Battery        6s 5000mA    8s 3700-4200mA        10s 3200-3700mA        12s 3000-3300mA
Battery ‘C’    25C               25C                           25C                            25C
Motor           1100kv          890kv                        630kv                         550kv
ESC             120A             100-120A HV              80A HV                        80A HV
Pinion           13T or 14T    12T or 13T                  13T or 14T                  13T or 14T
Rotor RPM     2100-2200    2100-2200                  2100-2200                   2100-2200

SPECIFICATIONS :

• Length: 1219mm, Height: 368mm , Width: 203mm
• Main Rotor Blade Size 600-640mm
• Main Rotor Diameter: 1355mm -1425mm
• Tail Blade Length: 95mm
• Tail Rotor Diameter: 250mm
• Main Gear ratio: Variable
• Tail Rotor Ratio 4.583:1